HomemadeSolar
Chapter 6 of 9

How to Size a Solar Battery and Panels (Beginner Math)

Plan these as two separate questions: how much do I need to store, and how much can the sun put back?

A. Battery: how long without sun?

Battery size (Wh) = daily Wh × days without charging ÷ 0.8

The 0.8 allows for the fact that you never get 100% of a battery's rated energy out to your devices (conversion losses and usable-capacity limits). It's a planning rule of thumb, not a promise.

  • Our office, 1 day: 596 × 1 ÷ 0.8 = 745 Wh
  • Our office, 2 days: 596 × 2 ÷ 0.8 = 1,490 Wh

So a power station around 1,000 Wh would be worth a close look for one day of backup. Check its manual's usable capacity; if the maker already gives usable energy, don't subtract losses twice.

B. Panels: how much can the sun replace?

Daily solar (Wh) ≈ panel watts × peak-sun hours × 0.75

Example: 300 W of panels × 4 peak-sun hours × 0.75 ≈ 900 Wh a day, comfortably above our 596 Wh. Peak-sun hours aren't hours of daylight; they're the equivalent hours of full, strong sun. Many U.S. locations get about 3 in winter and 5–6 in summer. Shade, angle, heat and weather all cut into it.

C. Making enough isn't the same as refilling in time

Making more energy than you use in a day doesn't guarantee the battery refills by sunset. When you use power, when the sun shines, the station's charging limit and how empty the battery started all matter. Don't divide battery size by panel watts and call it the charge time.

For your exact location, the free PVWatts calculator estimates monthly production. (It's built for grid-tied systems, so use it for production, not backup sizing.)

Run your numbers in the Solar Planner →